How to choose an operating table: load, positions, radiolucency
Load capacity, range of positions, radiolucency, accessories and powered controls: the technical criteria for choosing an operating table.
An operating table lasts twenty years. It determines what your theatre can operate on, and a badly chosen table translates into procedures refused or performed in poor conditions. Five questions to settle before comparing prices.
1. Which surgery will you perform?
Each specialty imposes its own constraints:
- General and visceral surgery: Trendelenburg and lateral tilt range.
- Orthopaedics: segmented tabletop, specific supports, and often a dedicated traction table.
- Urology and gynaecology: lithotomy position, incline, collection trough.
- Vascular and endoscopic surgery: radiolucency along the whole working length.
- Bariatric: high load capacity and adequate tabletop width.
Write the list of procedures before you meet the sales teams. It settles half the questions that follow.
2. Load capacity: read both figures
Manufacturers often publish two values: a static load and a load in articulated positions. The second is always lower, sometimes by 30%, and it is the one that counts in practice. A table advertised at 350 kg may only accept 250 kg in steep Trendelenburg.
Build in a margin: patient populations change, and a table is a two-decade investment.
3. Radiolucency
If you use an image intensifier, a mobile C-arm or intra-operative imaging, three points are decisive:
- the length of the radiolucent zone, and where it sits on the tabletop;
- the clearance beneath the tabletop, which determines C-arm access;
- the tabletop material — carbon fibre for artefact-free transparency.
Confirm compatibility with the exact C-arm model you own or plan to buy.
4. Powered movement and controls
A battery-powered electrohydraulic table is today's standard. Points to check:
- a wired or wireless hand control, plus a foot control, plus emergency controls on the base;
- a one-touch return to level, useful in an emergency;
- a mechanical emergency release to lower the tabletop in case of total failure;
- the quoted autonomy in number of cycles, and the recharge time.
Ask also whether the hand control can be sterilised or is used inside a cover.
5. Accessories: half the quotation
A bare tabletop is of no use. Price these separately: arm supports, shoulder supports, stirrups, anaesthesia screen, drape frame, mattress, straps, lateral support plate, leg holders. Confirm that the side rails are standard dimension, or you will be locked into one brand's accessories for twenty years.
Hygiene and upkeep
The mattress must be seamless, waterproof and disinfectant-resistant. The base must be deeply cleanable and the tabletop removable without tools to reach hidden areas. A badly designed base becomes a contamination reservoir you will never be able to treat properly.
Your checklist
- Is the planned procedure list covered, positions included?
- What is the permissible load in articulated positions?
- Does the radiolucent zone match my C-arm?
- Is there a mechanical emergency release?
- Are the rails standard, and what does each accessory cost?
- Who services it, and within what response time?
Browse the tables, lights and operating room equipment listed on MedicalExpo Africa, along with surgical instruments.