How to choose an anaesthesia machine: the buying guide
Ventilation modes, vaporisers, low-flow anaesthesia, hypoxic guard and paediatric use: the criteria for choosing a reliable anaesthesia workstation.
An anaesthesia workstation is a safety device before it is a comfort device. Savings made on integrated monitoring or on battery backup are paid for in patient risk. Here are the decision points, in the order they matter.
1. The gases available in your theatre
Before looking at a single model, answer this: is your theatre fed by a medical gas pipeline, or do you work from cylinders? A machine designed for a 4-bar pipeline cannot be improvised onto cylinders, or the reverse. Check the available inlets — oxygen, medical air, nitrous oxide — and the presence of a backup cylinder yoke with a pressure gauge.
If your medical gas installation is old or incomplete, deal with that project before buying the workstation.
2. The hypoxic guard, non-negotiable
Three devices must be present:
- a hypoxic guard that mechanically prevents delivery of an N2O/O2 mixture below the safety threshold;
- a low oxygen pressure alarm, audible, independent of mains power;
- automatic nitrous oxide cut-off on loss of oxygen.
Ask to see these functions demonstrated. A machine without them should not enter a theatre.
3. The ventilation modes you need
Today's useful minimum: VCV (volume controlled), PCV (pressure controlled) and pressure support for assisted spontaneous breathing. Theatres handling high-risk patients, thoracic surgery or prolonged laparoscopy also benefit from a pressure-controlled volume-guaranteed mode and finely adjustable PEEP.
A frequently overlooked point: the tidal volume range. If you operate on children, require a machine that goes down to 20 ml and is validated for paediatric and neonatal use. Not all are.
4. Vaporisers
Count one position per agent used, plus one free position. Check:
- the mounting type — a Selectatec manifold allows vaporiser changes without tools;
- an interlock preventing two vaporisers from being opened at once;
- agent-specific keyed filling, which prevents the wrong product being used.
A vaporiser needs calibration and servicing. Ask for the service cost and interval.
5. The circuit and low-flow anaesthesia
A closed circuit with a soda lime absorber enables low-flow anaesthesia, which reduces volatile agent consumption very significantly. Where sevoflurane is a substantial share of the theatre budget, that is a direct economic argument.
The conditions for exploiting it: a verified leak-tight circuit, and monitoring of inspired oxygen fraction and agent concentration — without which low flow becomes dangerous.
6. Integrated monitoring
Check what is included and what is optional: FiO2, EtCO2, volatile agent concentration, spirometry (volume, pressure, compliance, loops). Every missing parameter will have to be added through an external monitor, and the total will cost more than the integrated version.
See our guide to choosing a patient monitor if you complete the setup with a separate monitor.
7. Battery backup and robustness
Where power cuts are frequent, battery autonomy is not a detail: ask for the real duration under controlled ventilation, and confirm the machine retains a purely pneumatic manual ventilation mode in case of total failure. That is the last line of safety.
Your checklist
- Pipeline or cylinders? Is a backup supply present?
- Hypoxic guard and independent O2 alarm?
- Minimum tidal volume compatible with paediatrics if required?
- Vaporisers: mounting, interlock, service cost?
- FiO2, EtCO2 and agent monitoring included?
- Real battery life and a pneumatic manual mode?
- Trained technician and parts available in the country?
Compare anaesthesia and intensive care equipment listed on MedicalExpo Africa, and request several quotations in one step.