MedicalExpo AFRICA
Buying guide · 3 min read · HAMHAM Rachid

How to choose a wheelchair: manual, powered and sizing

Manual or powered, seat width, weight, propulsion and outdoor use: how to measure correctly and choose the right wheelchair.

A badly sized wheelchair does more than inconvenience: it causes pressure sores, shoulder pain and postural deformity. The right chair is defined by measurements, not by a catalogue model. Here is how to proceed, whether you are buying for one patient or for an institutional fleet.

1. Take the measurements before looking at models

Four measurements, taken with the person seated:

  • Seat width: hip width plus 2 to 4 cm in total. Too wide and the user loses stability and propulsion efficiency; too narrow and pressure points are crushed.
  • Seat depth: from the back to the back of the knee, minus 3 to 5 cm, to free the popliteal fossa.
  • Backrest height: according to trunk control. A backrest that is too high needlessly restricts shoulder movement.
  • Footrest height: thigh horizontal, foot flat, with no pressure under the thighs or the ischial tuberosities.

These four values immediately eliminate most models, which is the point.

2. Manual or powered?

The question is not budget but the person's actual independence:

  • Self-propelled manual: requires sufficient shoulder strength and range. The lightest, simplest and most repairable option.
  • Attendant-propelled manual: smaller rear wheels, push handles, attendant brakes.
  • Powered: indicated when manual propulsion is impossible or painful, or for long distances. Heavier, requires battery care and a reliable charging solution.

3. Weight, the underestimated criterion

A manual chair goes from 16-18 kg in steel to 11-14 kg in aluminium, and under 10 kg in high-end alloy. Every kilogram counts if the chair has to be loaded into a vehicle daily, or propelled by an elderly person. Ask for the weight without the quick-release wheels: that is the real load to lift.

4. Indoor or outdoor use

Terrain changes everything. For outdoor use on uneven ground, favour larger front castors, pneumatic rather than solid tyres, and a stable wheelbase. For indoor use, overall width and turning radius dominate: measure your doorways and corridors before ordering.

5. The cushion matters as much as the chair

For someone seated more than four hours a day, a pressure-relieving cushion is not an accessory. Memory foam, gel, air or a combination: the choice depends on the risk level and the person's ability to lift themselves. A decent chair with a bad cushion produces pressure sores; this is never the line to cut.

6. For an institutional fleet

If you are equipping a hospital or a care home, the logic differs:

  • favour two or three sizes rather than one universal size, weighted towards the middle sizes;
  • require standard spare parts — wheels, brakes, footrests, handles — and build a stock from delivery;
  • check folding and stacking for storage;
  • choose washable, disinfectable upholstery.

A homogeneous fleet of a single reference reduces maintenance cost very markedly.

Your checklist

  • Have the four measurements been taken on the person?
  • Does the propulsion mode match their real capability?
  • What is the weight to lift, wheels removed?
  • Have doorways and corridors been measured?
  • Is the cushion suited to the daily sitting time?
  • Which spare parts are available locally?

Compare wheelchairs and mobility aids listed on MedicalExpo Africa. See also rehabilitation and orthopaedics.