MedicalExpo AFRICA
Buying guide · 3 min read · HAMHAM Rachid

How to choose a dental chair: the 8 decisive criteria

Delivery system, turbine couplings, suction, operating light and ergonomics: what to check before buying a dental unit.

A dental chair — or unit — is bought for ten to fifteen years. It is the equipment you spend every working hour with, and the one whose failure stops the practice immediately. Price is therefore not the right first criterion: service availability is.

1. The instrument delivery system

Three configurations, and the choice is largely a matter of working habit:

  • Over the patient: instruments hang over the patient's chest. Good instrument visibility, but some patients find it intimidating.
  • Side delivery: the instrument arm sits to one side. Discreet for the patient, comfortable for a seated operator.
  • Cart: the module rolls. Ideal if you work across several rooms or change position often.

Try before you buy. A configuration that does not match how you work costs you in fatigue every single day.

2. The number and type of couplings

Count the instrument positions, then check the couplings. Turbines mainly use the Midwest 4-hole or the Borden 2-hole connection. If your current turbines are Borden and the unit is Midwest, you will have to buy new turbines or adapters.

Check also for outlets for: micromotor, ultrasonic scaler, curing light, air/water syringe, and one free position for a future instrument.

3. Suction

This is the most common weak point. Two technologies:

  • Wet ring: more tolerant, cheaper, consumes water continuously.
  • Dry ring: no water consumption, quieter, more expensive to buy.

The compressor and the suction motor are almost always sold separately. Get the whole installation quoted, not the unit alone — the gap can reach 30% of the total budget.

4. The operating light

A modern LED light delivers 25,000 to 40,000 lux at 70 cm, with a colour temperature around 5,000 K and a "composite" mode that limits premature curing. Check that the arm holds position without drifting: a soft arm is a defect that gets worse with time.

5. Chair ergonomics

Concrete points to test during the demonstration:

  • Programmable positions (at least three, plus zero return and a rinse position);
  • a headrest with two joints, and whether it really holds under the weight of a head;
  • the Trendelenburg position, needed if a patient faints;
  • a swivelling armrest, which determines access for patients with reduced mobility;
  • the foot control: range, precision, ease of cleaning.

6. Hygiene and cleanability

Upholstery should be seamless in contact areas and resistant to alcohol-based disinfectants — a question of service life as much as of hygiene. Check for a waterline disinfection system: without one, biofilm in the tubing becomes a real problem within months.

7. After-sales service, the criterion that matters

A chair out of service means a day of cancelled patients. Before signing:

  • Is there a technician trained on this brand in your city or country?
  • What is the contractual response time?
  • Which spare parts are held in local stock?
  • For how many years does the manufacturer guarantee parts availability?

A prestigious brand with no technician within 500 kilometres is a bad purchase.

8. Installation

Plan the water supply and drainage, the electrical supply, and where the compressor and suction will sit — they are noisy and need to be isolated. Ask the supplier for the technical installation drawing before the building work, not after.

Browse the dental equipment listed on MedicalExpo Africa and request several quotations at once. To equip the whole practice, see sterilisation and medical furniture as well.